Lcd Panel - Sony PDW-V1 Operation Manual

2-3 LCD Panel

1 Image display (color)
a Image display (color)
In playback and editing operations, this shows the
playback video, clip thumbnail images, and so on.
b Indicators on the back of the LCD panel
There are two indicators, as follows.
"/1 indicator
"/1 (on/standby) indicator: Lights when the on/standby
switch on the control panel is in the on (") position.
ACCESS indicator: Lights when the disc is being
accessed. If the on/standby switch is set to the 1
position while this indicator is lit, access to the disc is
completed before the unit switches to the standby
state.
24
2-3 LCD Panel
DATA DATA DATA
dB OVER dB OVER dB OVER
0 0 0
-12 -12 -12
-20 -20 -20
-30 -30 -30
-40 -40 -40
-60 -60 -60
CH- 15 CH- 26 CH- 37
2 Indicators on the back of the LCD panel
ACCESS
ACCESS indicator
1 Status display (monochrome) (see page 24)
DATA
VITC VIUB COUNTER VITC ALARM
dB OVER
0
-12
-20
HOURS MINUTES SECONDS FRAMES
-30 [ ]
AUDIO 625 IMX 50 40 30
-40
48CH 16 24 BIT 525 DVCAM
-60
CH- 48 BATT E F
2 Display setting section and WARNING indicator (see page 25)
Note
While the ACCESS indicator is lit, do not turn off the AC
power switch, disconnect the power cord, or remove the
battery. This could lead to a loss of data from the disc.
1 Status display (monochrome)
1 Audio level meters
DATA DATA DATA
dB OVER dB OVER dB OVER dB
0 0 0 0
-12 -12 -12 -12
-20 -20 -20 -20
-30 -30 -30 -30
-40 -40 -40 -40
-60 -60 -60 -60
CH- 15 CH- 26 CH- 37 CH- 48
3 AUDIO indicators
4 BATT display
5 525/625 indicator
a Audio level meters
These show the audio levels for channels 1 to 4 or channels
5 to 8. When the audio level exceeds 0 dB on any channel,
the OVER indicator for that channel lights.
2 Time data display
DATA
VITC VIUB COUNTER VITC ALARM
OVER
HOURS MINUTES SECONDS FRAMES
AUDIO 625 IMX 50 40 30 [ ]
48CH 16 24 BIT 525 DVCAM
BATT E F
6 Disc loaded mark
7 IMX/DVCAM indicator