Release G.03.11 - HP ProCurve 4100GL Series Operating

Software Fixes

Release G.03.11

Release G.03.11
Never released.
Update to the Manufacturing-only test routine.
Release G.03.10 6/28/01
Performance enhancements to the message system, address learning, and SNMP.
Release G.03.09 6/27/01
The switch's CDP packets have been modified to better interoperate with older Cisco IOS
versions. Certain legal CDP packets sent from the ProCurve switch could result in Cisco
routers, running older IOS versions, to crash. Note: The ProCurve switch's CDP packets are
legal both before and after this modification.
IGMP (PR_2997) — Switch may stop sending IGMP queries on some VLANs.
IGMP (PR_3045) — With IGMP enabled, toggling IGMP off and then on again causes all
querier intervals to be cut in half.
LACP (PR_2979) — Ports are put into Standby mode when they shouldn't be.
LACP (PR_3006) — Dynamic LACP creates 2 trunks when it should only create one.
LACP (PR_3019) — When an LACP port is put into Standby mode, MAC address learning
on the switch may stop.
Release G.03.08 5/21/01
First release for the HP ProCurve Switch 4108GL.
22