Release G.04.05 - HP ProCurve 4100GL Series Operating

TACACS+ (PR_4110) — When logging into the switch via TACACS+ encrypted authenti­
cation, the packet header has the 'encryption' field set to 'TAC_PLUS_CLEAR' when the body
of the packet is actually encrypted.
XRMON (PR_4215) — The switch incorrectly reports XRMON support to TopTools query.

Release G.04.05

Never released.
Modification of Lab troubleshooting commands.
Release G.04.04 1/10/02
Caution Regarding Gigabit-SX and -LX Port Settings for Links Between an HP Series 4100GL
Switch and Other Switch Models:
In the HP 1600M/2400M/2424M/4000M/8000M switches, and also in other vendors' switches,
the default port mode setting for the Gigabit-SX and Gigabit-LX ports is forced 1000FDx
(Gigabit full-duplex). However, the default port mode for the Gigabit- SX and -LX ports in
the HP 4108GL is Auto. In earlier software releases, the HP 4108GL tolerated this mismatch
and allowed SX and LX links with these other switches to exist. The HP 4108GL (when
running software release G.04.04 or greater) now complies with the Gigabit-SX and -LX
standard that disallows linkbeat to be enabled when there is a mismatch. (The HP 4104GL,
introduced with software release G.05.02, also complies with this requirement.) Thus,
mismatched links between Gigabit-SX and -LX ports on an HP Series 4100GL switch and the
HP 1600M/2400M/2424M/4000M/8000M switches or other switches that were formerly
allowed will now fail. To avoid this problem either reconfigure the Gigabit-SX and -LX ports
to Auto on the HP 1600M/2400M/2424M/4000M/8000M switches or other switches, or recon­
figure the Gigabit-SX and -LX ports on the HP Series 4100GL switches to 1000FDx.
Release G.04.03
Never released.
Release G.04.02 12/21/01
Corrupted Flash (PR_3932) — An SNMP set, during the OS download operation of
TopTools, while the switch is writing new OS to flash may result in corrupted flash and switch
may boot up in LAN Monitor mode.
Software Fixes
Release G.04.05
19