Release G.05.04 11/4/02 - HP ProCurve 4100GL Series Operating

Software Fixes

Release G.05.04 11/4/02

GVRP (PR_5076) — GVRP registrations are not occurring appropriately after port blocks/
unblocks.
GVRP (PR_5085) — Switch stops advertising tagged and untagged VLANs on all ports when
GVRP port disable is set for one port.
Hot-swap (PR_5012) — After hot-swapping a Gig-T module, the switch (incorrectly)
detects a self-test failure with the module.
Link-up Polling Interval (PR_5000) — A delay of up to 1.7 seconds between plugging in
a cable (linkbeat established) and traffic being forwarded to and from that port may cause
problems with some time sensitive applications. For example, AppleTalk dynamic address
negotiation can be affected, resulting in multiple devices using the same AppleTalk address.
TACACS (PR_5226) — During TACACS Authentication the TACACS Server's IP address
is shown on the switch's 'splash screen'. [Fix is to not display the TACACS Server's IP
address.]
TCP (PR_5227) — TCP port 1506 is always open. [Fix is to close TCP port 1506.]
TFTP/Config File (PR_5032) — When a configuration file is copied from a TFTP server
onto the switch, it removes "no ip untagged 2" from the VLAN configuration.
Web-Browser Interface (PR_4702) — When configuring a static learn mode for port
security, the message "error in pdu" is displayed if the port does not have LACP disabled.
Web-Browser Interface (PR_4976) — Mis-spelled word on the product registration
screen of the WEB UI. The phrase "...does not appears above..." is now "...does not appear
above..."
Web-Browser Interface (PR_5052, 5140) — The CLI does not disable the web-browser
interface.
Web-Browser Interface (PR_5199) — Having a ProCurve switch 4100GL series as a
commander, and a ProCurve switch 4000m as a member of the stack, the stack commander
was not checking security when doing passthrough.
Release G.05.04 11/4/02
This build is identical to G.05.03, but was intended to be a general release build, and so was
archived and labeled.
Crash (PR_4621) — The switch may crash with a message similar to:
-> NMI occurred: IP=0x00317d9c MSR:0x0000b000 LR:0x00013b88 Task='eDrvPollRx' Task
ID=0x1708f20 cr: 0x22000080 sp:0x01708e60 xer...
15