Power Connector - HP Pavilion x360 14 Series Maintenance And Service Manual

Power connector

Table 5-16 Power connector description and part number
Description
Power connector
Before removing the power connector, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display (see
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the power connector and cable from the computer (2).
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page 34).
Display assembly on page
31).
59).
Component replacement procedures
Spare part number
L51098-001
30).
67