Hard drive and hard drive cover
Table 5-4
Hard drive and hard drive cover descriptions and part numbers
Description
Hard drive, 1 TB, 5400 rpm, hybrid 8 GB SSD
Hard drive, 1 TB, 5400 rpm
Hard drive, 500 GB, 5400 rpm
Hard drive cover for use in models without a fingerprint reader
Hard drive cover for use in models with a fingerprint reader
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery (see
Remove the hard drive:
1.
Disconnect the hard drive cable from the system board ZIF connector (1).
2.
Lift up the connector side of the hard drive (2), and then remove the hard drive from the computer (3).
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page
34).
Spare part number
924036-860
L30422-006
778186-005
L51121-001
L51122-001
30).
31).
Component replacement procedures
37