Table of Contents
Advertisement
2.
Lift the processor (3) straight up and remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Power connector cable
Description
Power connector cable (includes bracket)
Before removing the optical drive connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see Battery), and then remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
WLAN module (see
d.
Keyboard (see Keyboard)
e.
Top cover (see
f.
System board (see
60
Chapter 4 Removal and replacement procedures
This manual downloaded from http://www.manualowl.com
The gold triangle (4) on the processor must be aligned with the triangle icon embossed
Hard
drive)
Optical
drive)
WLAN
module)
Top
cover)
System
board)
Spare part number
698078-001
Advertisement
Table of Contents
