Bottom cover and Rubber Foot Kit
Table 5-1
Bottom cover and Rubber Foot Kit descriptions and part numbers
Description
Bottom cover for use in models with discrete graphics memory:
Ash gray
●
Natural silver
●
Luminous gold
●
Bottom cover for use in models with UMA graphics memory:
●
Ash gray
●
Natural silver
●
Luminous gold
Rubber Foot Kit:
Ash gray
●
Natural silver
●
●
Luminous gold
▲
Prepare the computer for disassembly
Remove the bottom cover:
1.
Peel the two upper rubber feet off the bottom of the computer (1).
2.
Remove the two Phillips M2.0 × 8.0 screws from under the feet (2) and the two Phillips M2.0 × 4.0
screws from the bottom edge (3).
(Preparation for disassembly on page
Spare part number
L51085-001
L51089-001
L51090-001
L51086-001
L51087-001
L51088-001
L51123-001
L51124-001
L51125-001
30).
Component replacement procedures
31