Solid-State Drive - HP Pavilion x360 14 Series Maintenance And Service Manual

Solid-state drive

Table 5-5 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, TLC
512 GB, PCIe, value
256 GB, PCIe
128 GB, SATA-3, TLC
16 GB, PCIe (Optane Memory Module)
Solid-state drive module foil cover
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the solid-state drive:
1. Remove the cover from on top of the drive (1).
2. Remove the Phillips M2.0 × 3.0 screw (2), and then pull the solid-state drive module from the socket (3).
Reverse this procedure to install the solid-state drive.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page 34).
Spare part number
L60104-001
L51130-001
L51129-001
L51128-001
L51131-001
L51103-001
30).
31).