Heat Sink - HP Pavilion x360 14 Series Maintenance And Service Manual

Heat sink

Table 5-11 Heat sink descriptions and part numbers
Description
Heat sink for use in fanless models with an Intel Pentium processor and with UMA graphics
Heat sink for use in models with a fan with an Intel Core processor and with UMA graphics
Heat sink for use in models with an Intel Core processor and with discrete graphics
Miscellaneous kit (includes heat sink Mylar, heat sink conductive tape, heat sink gasket, and WLAN
module gasket)
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the heat sink from models with discrete graphics:
1. Remove the six Phillips M2.0 × 4.0 screws (1) that secure the heat sink to the system board.
2. Remove the heat sink (2).
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page 34).
Spare part number
L51099-001
L51100-001
L51101-001
L54102-001
30).
31).
Component replacement procedures 49