Touchpad - HP Pavilion x360 14 Series Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available
using spare part number L51092-001.
Table 5-9 TouchPad descriptions and part numbers
Description
TouchPad, ash silver
TouchPad, natural silver
TouchPad, luminous gold
Before removing the TouchPad , follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the TouchPad:
1. Disconnect the cable from the ZIF connector on the TouchPad (1).
2. Remove the four Phillips M2.0 × 2.0 screws (2) that secure the TouchPad bracket to the top cover.
3. Remove the TouchPad bracket from the computer (3).
4. Remove the three broad head Phillips M2.0 × 2.0 screws (4) that secure the TouchPad to the top cover.
5. Remove the TouchPad from the computer (5).
Reverse this procedure to install the TouchPad.
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page 34).
Spare part number
L51115-001
L51116-001
L51117-001
30).
31).