Speaker description and part number
Speakers (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
Prepare the computer for disassembly
Remove the bottom cover (see
Remove the battery (see
Remove the speakers:
Disconnect the speaker cable from the system board (1).
Disconnect the antenna cable from the WLAN module (2).
Release the cables from the routing over the speaker (3).
Disconnect the display cable from the system board (4).
Remove the display cable from the routing over the speaker (5).
Disconnect the CCD (webcam) cable from the system board (6).
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page
Spare part number
Component replacement procedures