Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the display (see
Remove the power connector cable:
1.
Disconnect the power connector cable from the system board (1).
2.
Remove the power connector cable from the computer (2).
Reverse this procedure to install the power connector cable.
52
Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page
33).
Display assembly on page
31).
49).
Spare part number
L18220-001