7.1
INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121628
Illustrated Parts Manual ................................................................3121629
3121627
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2
OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Operating Specifications
Table 7-1. Operating Specifications
Travel Speed
Maximum Travel Grade, stowed
Position (Gradeability)
2WD
4WD
Maximum Travel Grade, stowed
Position (Side Slope)
Turning Radius (Outside)
2WS
4WS
Turning Radius (Inside)
2WS
4WS
Overall Width
Tailswing
Ground Clearance
3.0 MPH (4.83 Km/hr.)
30%
45%
5®
19'8" (6.02 m)
11'7" (3.53 m)
12'6" (3.8 m)
6' (1.83 m)
8'2" (2.48 m)
8'4" (2.56 m)
11" (28 cm)
7-1