SECTION 6 - ACCESSORIES
Inspection Before Use
The external fall arrest system must be inspected before each use of
the aerial work platform. Replace components if there are any signs
of wear or damage.
Before each use, perform a visual inspection of the following compo-
nents:
6-16
• Cable: Inspect cable for proper tension, broken strands, kinks, or
any signs of corrosion.
GAP SHOWING:
GAP SHOWING:
INCORRECT
INCORRECT
NO GAP:
NO GAP: CORRECT
CORRECT
Figure 6-1. Bolt-On External Fall Arrest Cable Tension
• Fittings & Brackets: Ensure all fittings are tight and there are no
signs of fractures. Inspect brackets for any damage.
3121627