Operation; Skyglazier - JLG 800a Operation And Safety Manual

SECTION 6 - ACCESSORIES
• Ensure no personnel are beneath platform.
• Do not exit platform over rails or stand on rails.
• Use this option only on approved models.
• Keep lanyard attached at all times.
• Use correct cutting settings.
• Do not use electrical cords without ground.
• Do not use electrical tools in water.
• Do not cut platform, or ground through the platform.
• Wear proper cutting apparel.
• Do not drive machine while connected to external air/gas
sources.
Preparation and Inspection
• Connect ground clamp to metal being cut.
• Ensure there is a good ground connection.

Operation

Start the engine, turn on the generator, then turn on the plasma
cutter.
See the Miller Plasma Cutter Owner's Manual (PN 3128420) for
more information.
6-8
6.5

SKYGLAZIER™

SkyGlazier™ allows glaziers to position panels efficiently. The gla-
zier package consists of a tray that attaches the bottom of the
platform. The panel rests on the tray and against top-rail of the
platform, which is padded to prevent damage. SkyGlazier™
includes a strap to secure the panel to the platform rail.
3121627