Lexmark T650n Service Manual page 97

Error
code or Error contents
message
260.06 Sensor (envelope
feeder pass through)
late jam
Source = Envelope
feeder
260.07 Sensor (input) late
jam
Source = Envelope
feeder
260.10 Sensor (input) late
jam
Source = Envelope
feeder
260.11 Sensor (input) late
jam
Source = Envelope
feeder
260.12 Sensor (input) late
jam
Source = Envelope
feeder
260.13 sensor (envelope
feeder pass through)
static jam
260.14 Sensor (input) late
jam
Source = Envelope
feeder
Description/Action
The media is late reaching the
sensor (envelope feeder pass
through) within the specified
time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
Media remains on the sensor
(envelope feeder pass through)
during the warm up sequence.
The media is late reaching the
sensor (input) within the
specified time.
Possible repair actions
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Ensure envelope feeder is
not overfilled.
4. Check, clean or replace the
envelope feeder pick roll for
wear and excess
contamination.
5. Check all connections on
the envelope feeder.
6. Check all connections on
the system card assembly.
7. Replace the envelope
feeder assembly if problem
remains.
8. Replace system card
assembly if problem
"System
remains. Go to
card assembly removal
(T650, T652, T654)" on
page 4-71.
Go to sensor (input) late jam
service check.
"Sensor (input) late jam
See
service check." on
page 2-120.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-120.
Go to sensor (input) late jam
service check.
"Sensor (input) late jam
See
service check." on
page 2-120.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-120.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Replace the envelope
feeder is problem remains.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-120.
Diagnostic information
4062
2-65