Lexmark T650n Service Manual page 92

4062
Error
code or
message
245.40
245.49
245.50
245.52
2-60
Service Manual
Error contents
Sensor (pass through)
lingering jam
Source = Tray 5
HCIT tray lift motor
stalled failure
Source = Tray 5
HCIT tray lift motor
underspeed failure
Source = Tray 5
HCIT tray lift motor
overrun failure
Source = Tray 5
Description/Action
Media reached the sensor
(pass through) within the
specified time but did not clear
it within the specified time.
The HCIT tray lift motor has
stalled or has become
obstructed.
The HCIT tray lift motor does
not rotate at the specified
speed.
The HCIT tray lift motor
continues to detect pulses after
the motor has turned off.
Possible repair actions
Go to sensor (pass through)
lingering jam service check.
See "Sensor (pass through)
lingering jam service check."
on page 2-137.
1. Ensure the HCIT media tray
assembly is properly inserted
into the machine.
2. Check the HCIT tray lift
motor assembly for binding or
damage.
3. Replace the HCIT tray lift
drive motor assembly if
problem remains.
"High capacity input
Go to
tray (HCIT) tray lift drive
motor assembly removal" on
page 4-91.
1. Ensure the HCIT media tray
assembly is properly inserted
into the machine.
2. Check the HCIT tray lift
motor assembly for binding or
damage.
3. Replace the HCIT tray lift
drive motor assembly if
problem remains.
"High capacity input
Go to
tray (HCIT) tray lift drive
motor assembly removal" on
page 4-91.
1. Ensure the HCIT media tray
assembly is properly inserted
into the machine.
2. Check the HCIT tray lift
motor assembly for binding or
damage.
3. Replace the HCIT tray lift
drive motor assembly if
problem remains.
Go to "High capacity input
tray (HCIT) tray lift drive
motor assembly removal" on
page 4-91.