Lexmark T650n Service Manual page 100

4062
Error
code or
message
27x.51
x = bin
number
271.52
x = bin
number
27x.53
x = bin
number
27x.54
x = bin
number
27x.55
x = bin
number
27x.58
x = bin
number
28x.25
x = bin
number
2-68
Service Manual
Error contents
Right tamper does not
leave home position
failure
Applies to:
Offset stacker
Sensor (mailbox
empty) lingering jam
Applies to:
Mailbox
Sensor (mailbox
empty) late jam
Applies to:
Mailbox
Sensor (output pass
through) lingering jam
Applies to:
Mailbox
Sensor (mailbox
empty) lingering jam
Applies to:
Mailbox
Sensor (output pass
through) late jam
Applies to:
Mailbox
High capacity stacker
Offset stacker
Output expander
Invalid ejector motor
manager status.
Applies to:
StapleSmart finisher
Description/Action
The sensor (right tamper HP)
does not detect that the tamper
has moved from home position.
The media reached the sensor
(mailbox empty) but did not
clear it in the specified time.
The media is late reaching the
sensor (mailbox empty) within
the specified time.
The media reached the sensor
(output pass through) but did
not clear it in the specified time.
The media reached the sensor
(mailbox empty) but did not
clear it in the specified time.
The media is late reaching the
sensor (output pass through)
within the specified time.
A software failure has occurred
with the output option.
Possible repair actions
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the right tamper
motor assembly.
"Stapler finisher
Go to
tamper drive motor
assembly removal" on
page 4-128.
4. Replace the sensor (tamper
HP).
Go to "Stapler finisher
sensor (tamper HP left and
right) removal" on
page 4-129.
4. Replace the output option if
problem remains.
See "Sensor (mailbox empty)
lingering jam service check"
on page 2-145.
"Sensor (mailbox empty)
See
late jam service check" on
page 2-144
See "Sensor (output pass
through) lingering jam
service check" on
page 2-142.
See "Sensor (mailbox empty)
lingering jam service check"
on page 2-145.
See "Sensor (output pass
through) late jam service
check" on page 2-141.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.