Lexmark T650n Service Manual page 63

Error
code or Error contents
message
230.01 Sensor (duplex input)
lingering jam
Source = Internal
duplex
230.02 Sensor (duplex input)
late jam
Source = Internal
duplex
230.03 Sensor (duplex input)
bounce
Source = Internal
duplex
230.04 Sensor (input) late
jam from duplex
Source = Internal
duplex
230.05 sensor (duplex input)
lingering jam
Source = Internal
duplex
230.06 Sensor (input) late
jam from duplex
Source = Internal
duplex
230.07 Sensor (input) late
jam from duplex
Source = Internal
duplex
230.08 Internal duplex drive
motor load error
Source = Internal
duplex
Description/Action
Media reached the sensor
(duplex input) but did not clear
it in the specified time.
Media is late reaching the
sensor (duplex input) within the
specified time.
The sensor (duplex input)
rebounded once the trailing
edge of the media passed.
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
internal duplex.
Media reached the sensor
(duplex input) but did not clear
it in the specified time.
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
internal duplex.
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
internal duplex.
The internal duplex drive motor
assembly has failed or caused
high mechanical load during
warm up sequence.
Possible repair actions
Go to sensor (duplex input)
lingering jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-136.
Go to sensor (duplex input) late
jam service check.
See "Sensor (duplex input)
late jam service check." on
page 2-132.
Go to sensor (duplex input)
service check. See "Sensor
(duplex input) service
check" on page 2-118.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-120.
Go to sensor (duplex input)
lingering jam service check.
"Sensor (pass through)
See
late jam service check" on
page 2-136.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-120.
Go to sensor (input) late jam
service check.
"Sensor (input) late jam
See
service check." on
page 2-120.
1. Remove all media present
in media path.
2. Check all connections on
the duplex media entrance
drive motor assembly.
3. Check all connections on
the system card assembly.
4. Replace the duplex drive
motor assembly if problem
remains. Go to "Duplex
drive motor assembly
removal (T652, T654)" on
page 4-10.
Diagnostic information
4062
2-31