Lexmark T650n Service Manual page 226

4062-XXX
•
Settings in the NETWORK/PORTS MENU group.
LES Applications
This disables all installed Lexmark Embedded Solution applications.
Settings are Disable and Enable. The default is Enable.
Energy Conserve
This menu controls what values appear on the Power Saver menu. If Off is selected in Energy Conserve
menu, then Disabled appears in the Power Saver menu and Power Saver can be turned off. If On is set in
Energy Conserve, the Power Saver feature cannot be disabled.
Paper Prompts
When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting
controls the tray the user is directed to fill. Selections are Auto (default), MP Feeder, and Manual Paper.
Env Prompts
This setting controls the tray the user is directed to refill when specific envelope size is out. The selections are
Auto (default), MP Feeder, Envelope Feeder, and Manual Env.
Action for Prompts
The three settings are Prompt user, Continue, or Use current. Make a setting change, and the press
Submitting selection appears on the display.
Font Sharpening
The settings range from 0 to 150. The default is 24. Make a setting change, and then press
selection appears on the display.
Wiper Messages
Settings are On and Off. The default is On. Make a setting change, and then press
selection appears on the display.
Clear Custom Status
No values exist for this operation. Pressing
Note: Executing this operation erases any strings that have been defined by the user for the default or
alternate custom messages.
Best Speed
Settings are For short jobs and For long jobs. Make a setting change, and then press
selection appears on the display.
3-24
Service Manual
initiates this operation.
.
. Submitting
. Submitting
. Submitting