4062-XXX
Operator panel hinge assembly, left removal (T650, T652, T654)
1. Remove the operator panel door assembly. See
T654)" on page
2. Remove the screw (A) securing the cover to the operator panel hinge assembly, left.
3. Remove the cover.
4. Detach the switch (B) from the operator panel hinge assembly, left.
5. Remove the harnesses (C) from the operator panel hinge assembly, left.
6. Detach the spring (D) from the operator panel hinge assembly, left.
7. Detach the spring (E) from the operator panel hinge assembly, left.
8. Remove the E-clip (F) from the operator panel hinge assembly, left.
9. Remove the pin (G) from the operator panel hinge assembly, left.
4-40
Service Manual
4-38.
C
A
"Operator panel door assembly removal (T650, T652,
B
G
D
E
F