Lexmark T650n Service Manual page 46

4062
Error
code or
message
200.12
200.13
200.14
200.15
2-14
Service Manual
Error contents
Laser power signal
error
Sensor (input) static
jam
Sensor (input) early
jam
Laser power did not
settle
Description/Action
The printhead laser power
signal has failed
Media remains on the sensor
(input) during the warm up
sequence.
The media reached the sensor
(input) sooner than the
specified time.
Laser circuit failure on
printhead or system card
assembly.
Possible repair actions
1. Remove all media present
in media path.
2. Check all connections on
the printhead.
3. Check all connections on
the system card assembly.
4. Replace the printhead if
problem remains. Go to
"Printhead assembly
removal (T650)" on
page 4-48 or "Printhead
assembly removal (T652,
T654)" on page 4-49
5. Replace the system card if
problem remains. Go to
"System card assembly
removal (T650, T652,
T654)" on page 4-71.
Go to sensor (input) static jam
service check.
See "Sensor (input) static
jam service check" on
page 2-126.
Go to sensor (input) early jam
service check.
See "Sensor (input) early jam
service check" on
page 2-124.
1. Remove all media present
in media path.
2. Check all connections on
the printhead.
3. Check all connections on
the system card assembly.
4. Replace the printhead if
problem remains. Go to
"Printhead assembly
removal (T650)" on
page 4-48 or "Printhead
assembly removal (T652,
T654)" on page 4-49
5. Replace the system card if
problem remains. Go to
"System card assembly
removal (T650, T652,
T654)" on page 4-71.