24.1.3 Parameters affecting the MI/TI values
The MI/TI values are affected by transmission conditions (focus, drive frequency,
voltage applied to piezoelectric elements, etc.), scan conditions, and settings of the
main panel, and [Preset] menu.
(1)
Transmission conditions
Transmission focal position
Transmission frequency
PRF
Frame rate
Acoustic power
(2)
Scan conditions
Scan width
Number of scanning lines
(3)
Control switches affecting MI/TI
(a) Switches on the main panel
[2D]
[ADF]
[CDI]
[POWER]
[PW]
[CW]
[M]
[DEPTH/ZOOM]
[ACOUSTIC POWER]*
[SET]
[NEXT]
(b) Switches displayed in 2D mode
[2D Steer]
[ApliPure]
[Freq.]
[Focus]
[Focal Type]
[Scan Range]
[THI Type]
[Frame Rate]
(c) Switches displayed in CDI, POWER, and ADF modes
[Scale]
[C Freq.]
[C Focus]
[Frame Rate]
[Data No.]
(d) Switches displayed in PWD mode
[DOP Freq.]
[DOP Scale]
[UPDATE]
No. 2B771-004EN*M
24-4