Table of Contents
Advertisement
Zooming the specified portion of the image (Spot Zoom)
* This function is available when the selected transducer is not a linear transducer.
* The zoom guide is not displayed in Quad (four-frame) display mode or M/Doppler
mode.
(1) Display "Spot" on the
(2) Rotate the [DEPTH/ZOOM] dial to display the zoom ROI on the image.
(3) Move the zoom ROI to the area to be zoomed.
(a) Moving the zoom ROI
Use the trackball when the function icon appears
(b) Changing the zoom ROI size
Press
Use the trackball to change the ROI size. Press
size.
* The size of the zoom ROI can also be changed by rotating the
[DEPTH/ZOOM] dial.
(4) Rotate the [DEPTH/ZOOM] dial.
The zoom guide is displayed at the top right of the screen and the portion of
the image inside the zoom ROI is zoomed.
(5) Pressing the [DEPTH/ZOOM] dial again terminates Spot Zoom mode and
returns the image to the depth (size) that was set before the image was
zoomed.
switch in the [OTHER] menu.
to change the function icon to
No. 2B771-004EN*M
14-9
.
.
to set the ROI
Advertisement
Table of Contents
