Toshiba Aplio 500 TUS-A500 Operation Manual page 148

(2) [CW] Page
<<Display example>> Exam Type: [Adult Heart], Transducer: PST-30BT
Switch
[Sub Preset] Displays created sub presets.
Used to select the image size in 2D+CW display mode.
Refer to
panel" for details.
Used to reverse the waveform.
Switches between showing and hiding the Doppler trace line.
Used to select which modes Quick scan is enabled for when
[Q. Scan] is pressed.
[B-Only]
[D-Only]
[Sync.BD]
[NonSync.BD] : Quick scan is enabled only for Doppler mode
Used to specify the length of viewing time used for calculating
the velocity range and baseline value for [Q. Scan].
[Short], [Middle], or [Long] can be selected.
Used to specify the waveform display size for the velocity range
for [Q. Scan].
[Small], [Middle], or [Large] can be selected.
Used to select whether the 2D mode image is displayed in real
time ([2D REAL]) or the M-mode or Doppler mode image is
displayed in real time ([MD REAL]), when Doppler mode is
entered from 2D mode.
Used to select whether the Doppler scale is set to velocity
([cm/s]) or frequency ([Hz]).
Function
of subsection 14.7.2 "Adjustment using the main
: Quick scan is enabled only for 2D mode.
: Quick scan is enabled only for Doppler mode.
: Quick scan is enabled for both 2D mode and
Doppler mode when both 2D mode and
Doppler mode real-time images are displayed.
when both 2D mode and Doppler mode real-
time images are displayed.
No. 2B771-004EN*M
14-42