Table of Contents
Advertisement
14.7.3 Adjustments using the touch panel
(1) [PW] page
<<Display example>> Exam Type: [Abdomen], Transducer: PVT-375BT
Switch
[Sub Preset]
Displays created sub presets.
Used to select the image size in 2D+PW display mode. Refer to
of subsection 14.7.2 "Adjustment using the main panel" for
details.
Used to reverse the waveform.
Used to set simultaneous display of Color and PW images at the
time of switching from Color mode to PW mode to ON/OFF.
Used to select whether or not the trace line is to be displayed in
Doppler mode.
Used to select which modes Quick scan is enabled for when
[Q. Scan] is pressed.
[B-Only]
: Quick scan is enabled only for 2D mode.
[D-Only]
: Quick scan is enabled only for Doppler mode.
[Sync.BD]
: Quick scan is enabled for both 2D mode and
Doppler mode when both 2D mode and
Doppler mode real-time images are displayed.
[NonSync.BD] : Quick scan is enabled only for Doppler mode
when both 2D mode and Doppler mode real-
time images are displayed.
Used to specify the length of viewing time used for calculating the
velocity range and baseline value for [Q. Scan].
[Short], [Middle], or [Long] can be selected.
Used to specify the waveform display size for the velocity range
for [Q. Scan].
[Small], [Middle], or [Large] can be selected.
No. 2B771-004EN*M
14-38
Function
Advertisement
Table of Contents
