Table of Contents
Advertisement
Operations from the touch panel ([OTHER] tab menu)
[OTHER] page 1/3
No.
Switch
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
Resets the settings of Scan Range, Color ROI, and Doppler
range gate position in 2D mode or volume display in 4D
mode to the initial values during measurement or imaging.
Displays the cursor on the monitor.
Used to select the image zooming method (Center or Spot).
* Refer to subsection 14.1.4 for details.
Displays the [PHYSIO] menu.
Used to adjust the brightness and contrast of the touch
panel.
* Press the corresponding knob to toggle the label of this
switch between [TCS Brightness] and [TCS Contrast].
Used to adjust the volume and tone of the beep that is output
when a switch on the main panel is pressed.
* Press the corresponding knob to toggle the label of this
switch between [Panel Beep Volume] and [Panel Beep
Tone].
Used to adjust the volume and tone of the beep that is output
when a printing, storage, or video recording operation is
performed.
* Press the corresponding knob to toggle the label of this
switch between [Output Beep Volume] and [Output
Beep Tone].
Switches the exam image display area on the monitor
(normal/expand).
No. 2B771-004EN*M
13-5
Function
Advertisement
Table of Contents
