Table of Contents
Advertisement
20. Maintenance
20.1 Technical Descriptions
For technical descriptions about this system, refer to the following manuals.
Installation manual
Maintenance manual
Disposal manual
20.2 Outline of Preventive Maintenance
Daily checks, periodic inspection, and replacement of consumable parts/periodically
replaced parts are included in preventive maintenance. For replacement of periodically
replaced parts, special techniques are required because special tools are used or there
are special risks involved.
TOSHIBA provides preventive maintenance services requiring special techniques on a
pay-for-service basis.
TOSHIBA requests that the user sign a preventive maintenance contract to arrange for
periodic inspection and cleaning by TOSHIBA service personnel in order to ensure
reliable system operation.
If you have any questions concerning preventive maintenance or preventive
maintenance contracts, contact your TOSHIBA service representative.
CAUTION:
NOTE:
The following message is displayed in the information display area when the
period of operation (time) set for the system has elapsed (factory setting: 600
hours). When this message is displayed, it is recommended that the user
submit a request for inspection by a service engineer. The interval for display
of this message can be changed. Contact your TOSHIBA service
representative.
1. If preventive maintenance is performed by the user, special
care must be taken to ensure safety.
2. If any abnormality of the system is found during inspection,
stop using the system and contact your TOSHIBA service
representative for repair.
No. 2B771-004EN*M
20-1
Advertisement
Table of Contents
