Operations Using The Touch Panel - Toshiba Aplio 500 TUS-A500 Operation Manual

19.2.1 Operations using the touch panel

The figure below shows the touch panel menu used for storing a dynamic image.
No. Switch
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
* When optical media or a server is selected as the destination, the same images are
also stored in the HDD.
The storage destination can be selected.
[HDD] : Hard disk
[OPTICAL] : CD/DVD
[USB] : USB flash drive
[Server] : DICOM server
This knob is used to specify the number of preceding cardiac
cycles for an image that is stored when [CLIPS STORE] is
pressed.
The method for specifying the image storing range can be
toggled between R-R (number of cardiac cycles) and Time
(seconds).
This knob is used to specify the number of preceding seconds
for an image that is stored when [CLIPS STORE] is pressed.
The image acquisition frame rate can be selected.
Frame rates of 60 Hz, 30 Hz, and 15 Hz can be selected.
The specified dynamic image is stored together with the raw
data.
Dynamic images with raw data are used for analysis by the
optional TCA and Wall Motion Tracking functions.
The Snapshot Clips mode can be set to [Retro] or [Pro].
The image storage type can be set as [Snapshot] or [Cine].
No. 2B771-004EN*M
19-3
Function
*
(DICOM cache)
*
*