13.5 Changing the Transducer During Examination
CAUTION: 1. Be sure to turn OFF the power or select another transducer connector
2. Do not connect or disconnect a transducer during system startup or
NOTE:
The connector lamp goes out when the transducer selection menu is closed
when another switch is selected.
before connecting a transducer to or disconnecting the transducer from
the currently selected transducer connector. Connecting a transducer
to or disconnecting the transducer from the currently selected
transducer connector can cause damage to the system or the
transducer.
shutdown. Doing so may cause a malfunction.
No. 2B771-004EN*M
13-18
*