Toshiba Aplio 500 TUS-A500 Operation Manual page 44

No. Switch
<16>
<17>
<18>
<19>
<20>
<21>
<22>
<23>
<24>
<25>
<26>
<27>
<28>
Starts up the [Patient Browser] screen.
Displays the previously acquired images or other data.
Starts basic measurement mode.
Starts basic measurement mode.
Starts application measurement mode.
The function of this knob varies according to the mode.
Measurement modes : Used to edit measurement results (for
Body mark entry mode : Rotates the transducer mark on the
Annotation mode
Switches to M mode.
The dial around the knob is used to adjust the gain in M mode.
Switches to CW mode.
Switches to PW mode.
The dial around the knob is used to adjust the gain in Doppler
mode.
Switches to POWER mode.
Switches to CDI mode.
The dial around the knob is used to adjust the gain in Color mode.
Switches to Dynamic Flow
Switches to 2D display mode.
The dial around the knob is used to adjust the gain in 2D mode.
Trackball : Used to move the cursor and measurement
markers.
Palm Dial :
During real-time display : Used to specify the gain in 2D mode.
In Freeze mode
No. 2B771-004EN*M
6-5
Function
example, modification of an ellipse or a
trace).
body mark.
: Rotates the arrow mark.
TM
mode.
: Used to play back a loop in Cine
review mode and to adjust the
playback speed.
Used to edit measurement results in
measurement modes.
Rotates the transducer mark on the
body mark in Body mark entry mode.
Rotates the arrow mark in Annotation
mode.