16.2 Setting and Editing Body Marks
Setting body marks
* To switch to a body mark menu for another application preset, switch to the
desired application preset. For details, refer to section 13 "Common
Operation for Each Mode".
* If the menu has two or more tabs, press the tab for the desired page.
Moving and rotating the transducer mark on the body mark
(1) Moving the transducer mark
Operate
(2) Rotating the transducer mark
Rotate
The palm dial around the trackball can be used while the image is frozen.
* The transducer mark is not displayed, depending on Exam Type.
Moving the body mark
(1) Press the knob next to
(2) Operate
(3) Press the knob next to
mark.
.
.
.
to move the body mark.
again to set the position of the body
No. 2B771-004EN*M
16-2