Securing The Panel-Mounting Thermostat; Central Fixing; Fixing Bracket - JUMO EMf-80 Series Operating Instructions Manual

3.2

Securing the panel-mounting thermostat

Operating
position

3.2.1 Central fixing

H

3.2.2 Fixing bracket

H
any
(standard)
➩ Chapter 3.1 "Dimensions", page 8
✱ Drill fixing hole
10.5
✱ Unscrew cap nut M 10 x 1, 10 a/f .
✱ Unscrew fixing nut M 10 x 1, 13 a/f.
✱ Insert thermostat in panel and secure with fixing nut.
Do not overload the plastic thread!
✱ Screw on the cap nut.
(Code b1, b2, b3)
➩ Chapter 3.1 "Dimensions", page 8
✱ Drill two fixing holes 3.5 mm or 4.5 mm dia. into the panel.
If required, drill the hole into the panel for resetting the thermostat.
Secure the thermostat with two M3 or M4 screws. It is essential that
the thermostat is not damaged by excessively long screws.
mm dia. in panel.
3 Mounting
9