Settings » Protection Settings » Protection Settings Group 1/2 » Broken Conductor Protection Settings
A. Broken Conductor Protection Settings button leads to the menu where broken conductor protection
parameters are set.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit, Save to Device button must be utilized, which is located under the Buffer tab.
1. Broken conductor protection parameters and settings area.
NOTE
The determination processes of parameter set values are beyond the content of this guide. See the relevant
section of the Relay Menus Manual for assistance on the protection functions and their parameters. Consider
providing professional help on the evaluation of parameters. □
- 153 -