System Settings - DEMA CPM 310 G User Manual

A. System Settings window is accessed by clicking the System Settings button under the Settings tab of
DigiConnect.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit, Save to Device button must be utilized, which is located under the Buffer tab.
1. CPM 310 G basic settings are made via the System Settings window under the Settings tab. The menu
monitors the system firmware version; and lets the user view and set time, date, nominal network power
frequency, relay ID, system password, password application settings (Setting Password Control and CB
Password Control), phase and earth symbolization, active settings group, phase rotation, LCD backlighting
and language parameters or options.
As seen on the picture above, the left side of the window includes the descriptions and current values of
the parameters, while the right side embeds combo and text boxes to edit parameters and options.
System settings parameters are studied at the System Settings subsection of the Relay Menus Manual in
the previous pages, thus, will not be gone over here again. The only exception to that is the Automatic
Time and Date option, located to the right side of time and date settings combo boxes.
When the Synchronize Time and Date with PC option is enabled, DigiConnect synchronizes the time and
date values with the PC operating system; and if these settings are uploaded to CPM 310 G, the system
time and date configurations of the relay will be synchronized to those of PC's. Note that manual setting of
the time and date fields is not allowed when the Synchronize Time and Date with PC option is enabled; so
the option must be disabled to perform a manual setting. □
Settings » System Settings
- 157 -