DEMA CPM 310 G User Manual page 33

Packing & Labeling Information
This section explains CPM 310 G packing information, package contents and introduces the device label.
Packing Information
Case Dimensions
Case Type
Gross Weight
Package Contents
Labels
CPM 310 G products arrive with 2 labels: package label and unit label.
The package label gives the following info.
Manufacturer Logo
Product Name
Product Description
Unit Serial Number
The unit label located on the front side of the relay gives the following info.
Manufacturer Logo
Product Name
2
Ordering Code
Product Description
Rated Frequency
Unit Serial Number
Nominal Phase Current
Nominal Earth Current
Earth Protection Setting Range
Auxiliary Supply Voltage
The default settings for the Nominal Phase Current, Nominal Earth Current and Earth Protection Setting Range
are marked in red. As seen on the below label; default values are: Nominal Phase Current In = 5A, Nominal
Earth Current Ien = 5A, and Earth Protection Setting Range = (0.1-40) I
The settings for the mentioned parameters can be changed via dip-switch settings if needed, as described in
the dedicated section Dip-switch Settings at p.47. If any changes are made on dip-switches, it is highly
recommended that the relevant red markings are erased gently with a soft cloth damped with alcohol and
remarked to demonstrate the actual setting; this will prevent misinterpretations. □
2 Ordering codes are given at p.219.
(17 x 20 x 24) (cm) [width x height x depth]
Carton box with IP50 sealing.
3.4 kg
CPM 310 G Digital Overcurrent Protection Relay
USB Communications Cable
Mounting Elements
CPM 310 G Quick Guide
CD that contains DigiConnect PC Program and
CPM 310 G User & Application Manual
DEMA
CPM 310 G
Digital Multifunction Overcurrent Relay 3Ph + E
G1234567
DEMA
CPM 310 G
11AB
Digital Multifunction Overcurrent Relay, 3Ph + E
50 Hz / 60 Hz
G0910001
1 A / 5 A
1 A / 5 A
(0.02 - 5) I / (0.1-40) I
en en
(24-240) V / V
DC AC
- 33 -
.
en
1 piece
1 piece
1 set
1 sheet
1 CD