Trip Settings - DEMA CPM 310 G User Manual

A. This window is accessed by clicking the Trip Settings button in the Automatic Control Settings window.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit, Save to Device button must be utilized, which is located under the Buffer tab.
1. Alternatives in the Trip Settings window provide the user to choose whether the defined protection
functions can trigger a trip process or not. As seen on the picture above, the window gives the protection
function titles, the current settings, and Active / Passive options for the functions to trigger a trip. By
default, the settings are made as Active so as to provide all functions to trip the CB; if any of the settings
are changed the Passive, the related functions will still run and generate alarms if predefined conditions
occur, but tripping by these functions will be prohibited.
WARNING!
Settings changes made on this menu will directly affect the way CPM 310 G controls the circuit breaker. It
is strongly recommended that settings changes are evaluated and made by only authorized personnel! □
Settings » Automatic Control Settings » Trip Settings
- 162 -