INSTALLATION - 24 VDC - SDN (375 / 475 SERIES)
INSTALLATION - 24 VDC - SDN (375 / 475 SERIES)
5. Remove both end caps
6. Connect shade and pre-wire, snap connector into spring clip.
1/16" hex tool
Motor End cap
7. Align and insert the motor side.
Idler End cap
Installation - Nano Roll - 24VDC - SDN (375 / 475)
Pg 11
Installation - Nano Roll - 24VDC - SDN (375 / 475)
Pg 12