INSTALLATION - 24 VDC - SDN (275 SERIES)
5. Connect shade and pre-wire connectors, snap into bracket
6. Insert motor side completely. Then, while supporting motor side, put idler end cap over the idler
and snap into place.
When installing, the shade should be at
the upper limit.
Installation - Nano Roll - 24VDC - SDN (275)
INSTALLATION - 24 VDC - SDN (275 SERIES)
Pg 7
Installation - Nano Roll - 24VDC - SDN (275)
There will be an audible click.
Pg 8