Leuze electronic LSIS 4xxi Series Original Operating Instructions page 52

Check program selection
During running operation of the LSIS 4xxi, you can simply change the check program via the
display. Prerequisite for this is that multiple check programs were set up previously via
webConfig.
Parameter
Parameter handling
Display settings
Program selection
Ethernet
Program selection
o Blob
Program 2
Program 3
...
Leuze electronic
ESC ESC
In the Parameter menu, use the
Program selection menu item.
Press the enter button to enter the Parameter handling
menu.
In the Program selection menu, use the
select the desired check program.
Press the enter button to activate the check program.
A selected program is immediately activated by pressing
the enter button. If, however, a test cycle is currently being
executed at this moment, this test cycle is executed to
completion and evaluated.
As the new check program is being activated, the green
"PWR" LED flashes.
Press the ESC button twice to return to the main menu.
LSIS 4xxi
Display and control panel
buttons to select the
buttons to
50