Leuze electronic LSIS 4xxi Series Original Operating Instructions page 42

The webConfig menus are intuitive to operate and contain both help texts as well as tooltips.
Because the webConfig user interface is always being developed further, it is described in
a separate software description. All released versions of this software description can be
found in the download area of the Leuze electronic homepage: www.leuze.com/...
Activities in webConfig
Use webConfig to set up the LSIS 4xxi. When doing so, observe the following points:
• Configure at least one check program and activate it.
• Set up one of the 8 IOs as a trigger input for the check program. Make certain that this
input is correctly connected (see chapter 5.2).
• If you use the RS 232 interface to communicate with the process control, you must
configure the transmission parameters of the RS 232 interface in the data output tool
of the respective check program.
For information on how that functions in webConfig, please refer to the webConfig software
description.
Leuze electronic
Commissioning and configuration
LSIS 4xxi 40