Configuring The Lsis 4Xxi From A Laptop Without A Network; Table 6.1; Address Assignment In The Ethernet - Leuze electronic LSIS 4xxi Series Original Operating Instructions

6.1.3 Configuring the LSIS
 Check the network address of the LSIS
in sequence during normal operation of the LSIS 4xxi.
This switches you to the Network settings submenu, where you can read the current
settings of the LSIS 4xxi.
 Note the values for Addr and Mask.
The value in Mask specifies which digits of the IP address of the PC and LSIS
match in order to communicate with one another.
Address of the LSIS
192.168.060.101
192.168.060.101

Table 6.1:

Instead of xxx, you can now assign your PC any numbers between 000 and 255, but NOT
THE SAME numbers as used with the LSIS 4xxi.
E.g. 192.168.060.110 (but not 192.168.060.101!).
If the LSIS
another.
Setting the IP address on the PC
 Log into your PC as administrator.
 Select Start->Control Panel to access the
Network Connections menu (Windows 2000/
XP) or Network and Sharing Center (Win-
dows Vista/Windows 7).
 There, select Local Area Connection and
right-click to open the corresponding properties
page.
 Select Internet Protocol (TCP/IP) (scroll
down if necessary) and click Properties.
 In the Internet Protocol (TCP/IP) Proper-
ties window, select the Alternate Configu-
ration tab.
 Set the IP address of the PC in the address
range of the LSIS 4xxi.
Attention: Not the same as for the LSIS!
 Set the subnet mask of the PC to the same value as on the LSIS 4xxi.
 Close the settings dialog by confirming all windows with OK.
 Connect the "Service" interface of the LSIS
Leuze electronic
4xxi
4xxi

Address assignment in the Ethernet

4xxi and the PC have the same IP address, they cannot communicate with one
Commissioning and configuration
from a laptop without a network
4xxi by pressing the enter button
Net mask
255.255.255.0
255.255.0.0
4xxi directly to the LAN port of your PC.
LSIS 4xxi
three times
4xxi must
Address of the PC
192.168.060.xxx
192.168.xxx.xxx
37