Table of Contents
Advertisement
7.3.4
Parameter menu
Parameter
Parameter handling
Display settings
Program selection
Ethernet
Parameter handling
The Parameter handling submenu is used to lock and release the parameter input via the
display and for resetting to default values.
Level 3
Parameter enable
Default parameters
Table 7.1:
Display settings
In the Display settings submenu, the complete display can be turned upside down,
meaning turned by 180°, via the Turn by 180˚ menu item to enable good display readability
at the mounting site, if necessary.
Program selection
In the Program selection submenu, a scrollbar can be used to activate any of the check
programs stored on the LSIS 4xxi.
A selected program is immediately activated by pressing the enter button. If, however, a test
cycle is currently being executed at this moment, this test cycle is executed to completion
and evaluated.
As the new check program is being activated, the green "PWR" LED flashes.
Level 3
Program name 1
Program name 2
Program name 3
...
Table 7.2:
Leuze electronic
Parameter - main menu
Editing Ethernet addressing and selecting check programs stored on the
LSIS 4xxi.
Level 4
Selection/configuration option
Description
OFF/ON
The standard setting (
parameter changes.
If parameter enabling is activated (
changed manually.
By pressing the enter button
Parameters to default
their standard settings without any further security
prompts.
In this case, English is selected as the display language.
Parameter handling submenu
Level 4
Selection/configuration option
Description
Here, you will find check programs previously set in
webConfig.
Program selection submenu
OFF
) prevents unintended
, all parameters are reset to
LSIS
4xxi
Display and control panel
ON
), parameters can be
after selecting
Standard
OFF
Standard
46
Hide quick links:
Advertisement
Table of Contents
