4.4
Lens replacement LSIS
Attention!
Replace the lens in an environment that is as clean, dry and dust-free as possible. When
doing so, make sure the lens cover is properly mounted to ensure protection class IP 65 /
IP 67 is fulfilled.
First loosen the 4 Phillips screws on the lens cover and remove the cover to the front as
shown in figure 4.8.
Figure 4.8:
Unscrew the installed C-mount lens from the lens mount in a clean environment by
turning it counter-clockwise and screw the new lens on by turning it clockwise on the lens
mount of the LSIS
Leuze electronic
4xxi
Lens replacement for C-mount devices
4xxi
M49-X9.
- C-mount devices
LSIS
4xxi
Installation and mounting
25