Menu Description; The Main Menus - Leuze electronic LSIS 4xxi Series Original Operating Instructions

7.3

Menu description

After voltage is applied to the smart camera, a startup screen is displayed for several
seconds. Afterwards, the main menu appears in the display.
7.3.1

The main menus

LSIS 400i
Leuze electronic
GmbH + Co. KG
SW: V 2.2.1 HW: V 01.09
SN: 0508A123456 001
IO1 IO2 IO3 IO4
IO5 IO6 IO7 IO8
ATT ERR TMP
Statistics
Counter state
Tested:
OK:
NOK:
Parameter
Parameter handling
Display settings
Program selection
Ethernet
Language
o Deutsch
o English
o Español
o Français
o Italiano
Service
Status messages
Leuze electronic
Device information - main menu
Information about
• Device type
• Software version
• Hardware version
• Serial number
Status displays - main menu
RS232
ETH 100 • Status displays of the switching inputs/outputs
• Display of warnings and errors
• Status information for the device interfaces
OK
• Optional: check program-specific display
See "Status displays" on page 45.
Statistics - main menu
Statistics data for the smart camera.
See "Statistics" on page 45.
0
0
0
Parameter - main menu
Configuration of the smart camera.
See "Parameter menu" on page 46.
Language selection - main menu
Selection of the display language.
See "Language selection menu" on page 47.
Service - main menu
Camera diagnosis and status messages.
See "Service menu" on page 47.
LSIS 4xxi
Display and control panel
44