Stand-Alone Connection; Figure 3.11: Stand-Alone Connection - Leuze electronic LSIS 4xxi Series Original Operating Instructions

3.4

Stand-alone connection

The smart cameras of the LSIS
devices. The LSIS
tion of the supply voltage, the interfaces and the switching inputs and outputs.

Figure 3.11: Stand-alone connection

The host/service interface is used to configure the LSIS 4xxi. Configuration is performed via
the integrated webConfig, which can be accessed via a PC with a current browser.
The freely configurable switching inputs and outputs are used for process control.
The LSIS 4xxi
process interface. The protocol for the RS232 interface can be configured for the specific
application in webConfig.
No configurable framing protocol is available for the Ethernet process interface. A pure
ASCII protocol is used via Ethernet.
Leuze electronic
4xxi
4xxi features multiple M12 connectors / sockets for the electrical connec-
can exchange data with the process control via the RS 232 or Ethernet
LSIS
series can be operated as individual "stand alone"
Supply voltage + 4 I/O
Host and service interface (Ethernet)
4 I/O + RS232 (process interface)
4xxi
Device description
17