Leuze electronic LSIS 4xxi Series Original Operating Instructions page 51

Network configuration
Information on network configuration can be found in chapter "Commissioning and configu-
ration" on page 36. If you need to set the IP address of the LSIS
as follows:
Changing the network settings on the display
Parameter
Parameter handling
Display settings
Program selection
Ethernet
Ethernet
o Ethernet 1
Ethernet 1
IP address
Gateway
Net mask
DHCP activated
Configuration changed:
System must be
restarted
ok
cancel
Leuze electronic
In the Parameter menu, use the
Ethernet menu item.
Press the enter button to enter the Ethernet menu.
Press the enter button again to enter the Ethernet 1
menu.
Use the
IP address, Gateway and Net mask menu items and
set the desired values or activate the DHCP function.
Exit the Ethernet 1 menu with the ESCAPE button.
ESC
The message shown at the side appears. Confirm with OK
to initiate a restart and to activate the changed
configuration.
buttons successively to select the
LSIS 4xxi
Display and control panel
4xxi via the display, proceed
buttons to select the
49