Mitsubishi Electric MELCEC Q Series User Manual page 48

4. CPU MODULE
Item
Internal relay [M]
Latch relay [L]
Step relay [S]
Link relay [B]
Timer [T]
Counter [C]
Data register [D]
Link register [W]
Annunciator [F]
File register [R]
Accumulator [A]
Index register [V, Z]
Pointer [P]
Interrupt pointer [I]
Special relay [M]
Special register [D]
Performance specifications (continued)
Q02CPU-A Q02HCPU-A
7144 points (M0 to M999, M2048 to M8191)
1048 points (L1000 to L2047)
0 point (None for default)
8192 points (B0 to B1FFF)
2048 points (Default: 256 points)
•100ms timer (T0 to T199) ...................... Setting time: 0.1 to 3276.7s
•10ms timer (T200 to T255) ................... Setting time: 0.01 to 327.67s
•100ms retentive timer (none for initial) .... Setting time: 0.1 to 3276.7s
•Expansion timer (T256 to T2047) ........ Time set by word device (D, W, R)
•1ms timer (None for initial)....... Setting time: 0.001 to 32.767s (The latter
half of the retentive timer can be used by
ZHTIME instruction.)
1024 points (Default: 256 points)
•Normal counter (C0 to C255) .............. Setting range : 1 to 32767 times
•Interrupt counter (none for default)
............C224 to C255 possible depending on setting
•Expansion counter (C256 to C1023)
.................. Count value set by word device (D,W,R)
8192 points (D0 to D8191)
8192 points (W0 to W1FFF)
2048 points (F0 to F2047)
8192 points (R0 to R8191)
2 points (A0, A1)
14 points (V, V1 to V6, Z, Z1 to Z6)
256 points (P0 to P255)
32 points (I0 to I31)
256 points (M9000 to M9255)
256 points (D9000 to D9255)
4 - 2
Model
Q06HCPU-A
Total 8192 shared by
M, L, S
Remark
The range can be
changed by
parameters.
The range and number
of points for use set by
parameters
(Refer to Section 4.2.1)
The range and number
of points for use set by
parameters
(Refer to Section 4.2.1)
Fault finding device
Points set by
parameters