Ferrite Core - Mitsubishi Electric MELCEC Q Series User Manual

8. EMC AND LOW VOLTAGE DIRECTIVES
(b) When connecting a cable longer than 2m, but not exceeding 10m
• Ground the shield section of the external wiring cable with a cable clamp.
(Ground the shield at the closest location to the A1SD75-S3 external wiring
connector.)
• Install a ferrite core.
• Connect the external wiring cable to a drive unit or an external device in the
shortest distance.
(c) Models and required quantities of the ferrite core and cable clamp
• Cable clamp
Model: AD75CK (manufactured by Mitsubishi Electric Corporation)

• Ferrite core

Model: ZCAT3035-1330 (manufactured by TDK Corporation)
Contact: TDK Corporation
• Required quantity
Cable Length
Within 2m
2m to 10m
(d) Cable clamp position
Inside control panel
A1SD75
AD75CK
Optional Part
1 axis
AD75CK 1
AD75CK 1
ZCAT3035-1330 1
20 to 30cm
8 - 7
Required Quantity
2 axes 3 axes
1 1
1 1
2 3